Buccutite™ Rapid APC Antibody Labeling Kit Microscale Optimized for Labeling 100 ug Antibody Per Reaction

Name: Buccutite™ Rapid APC Antibody Labeling Kit *Microscale Optimized for Labeling 100 ug Antibody Per Reaction*
Brand: AAT Bioquest
SKU: 1311
Price: 570 USD
Availability: InStock

APC is an red fluorescent protein which has an excitation wavelength of 651 nm and an emission wavelength of 662 nm. AAT Bioquest offers this Buccutite™ rapid labeling kit to facilitate the APC conjugations to antibodies and other proteins such as streptavidin and other secondary reagents. Buccutite™ APC Conjugation Kit provides a robust and convenient method to conjugate antibodies with APC. The kit includes a preactivated APC and reaction buffer. The conjugated antibody can be used in flow cytometry, WB, ELISA and IHC applications. This kit is sufficient for 2 labeling reactions, each up to 100 ug of antibody. The best ratio for any new antibody reagent must be determined by experimentation. Our kit provides preactivated APC to facilitate the APC conjugations to antibodies and other proteins such as streptavidin and other secondary reagents. Our preactivated APC is ready to conjugate, giving much higher yield than the conventionally tedious SMCC-based conjugation chemistry. In addition, our preactivated APC is conjugated to a protein via its amino group that is abundant in proteins while SMCC chemistry targets the thiol group that has to be regenerated by the reduction of antibodies.

Example protocol

AT A GLANCE

Protocol Summary

Add 5 µl Reaction Buffer (Component C) into antibody (100 µl)
Add the antibody solution into Buccutite™ MTA vial (Component B)
Incubate at room temperature for 30 minutes
Mix with 50 µL Buccutite™ FOL-Activated APC (Component A)
Incubate at room temperature for 60 minutes

Important Upon receipt, store the kit at 4 ^oC. When stored properly, the kit should be stable for six months. Alternatively, Component B can be stored at -20°C. Do not freeze Buccutite™ FOL-Activated APC (Component A), Reaction Buffer (Component C). Warm all the components and centrifuge the vials briefly before opening, and immediately prepare the required solutions before starting your conjugation. The following SOP is an example for labeling goat anti-mouse IgG antibody.

PREPARATION OF WORKING SOLUTION

Antibody working solution

For labeling 100 µg antibody (assuming the target antibody concentration is 1 mg/mL), mix 5 µL (5% of the total reaction volume) of Reaction Buffer (Component C) with 100 µL of the target antibody solution.
Note     If you have a different concentration, adjust the antibody volume accordingly to make ~100 µg antibody available for your labeling reaction.
Note      The antibody should be dissolved in 1X phosphate buffered saline (PBS), pH 7.2-7.4; If the antibody is dissolved in glycine buffer, it must be dialyzed against 1X PBS, pH 7.2-7.4, or use ReadiUse™ 10KD Spin Filter (Cat. # 60502 from AAT Bioquest) to remove free amines or ammonium salts (such as ammonium sulfate and ammonium acetate) that are widely used for antibody precipitation.
Note     Impure antibodies or antibodies stabilized with bovine serum albumin (BSA) or gelatin will not be labeled well.
Note     The antibody –Buccutite™ MTA reaction efficiency is significantly reduced if the antibody concentration is less than 1 mg/mL. For optimal labeling efficiency the final antibody concentration range of 1-10 mg/mL is recommended.

SAMPLE EXPERIMENTAL PROTOCOL

Run Antibody-Buccutite™ MTA reaction

Add the antibody working solution directly into the vial of Buccutite ™ MTA (Component B), and mix them well by repeatedly pipetting for a few times or vortex the vial for a few seconds.
Keep the antibody- Buccutite ™ MTA reaction mixture at room temperature for 30 - 60 minutes.
Note The antibody-Buccutite™ MTA reaction mixture can be rotated or shaken for longer time if desired.

Make antibody-APC conjugation

Make Buccutite™ FOL-Activated APC solution by adding 50 µL ddH2O into the vial of Buccutite™ FOL-Activated APC (Component A), mix well by repeatedly pipetting for a few times or vortex the vial for a few seconds.
Mix whole vial of Buccutite™ FOL-Activated APC solution into the antibody-Buccutite™ MTA solution, mix well and rotating the mixture for 1 hour at room temperature.
The antibody-APC conjugate is now ready to use.
Note For immediate use, the antibody-APC conjugate need be diluted with the buffer of your choice.

Storage of Antibody-APC Conjugate

The antibody conjugate should be stored at > 0.5 mg/mL in the presence of a carrier protein (e.g., 0.1% bovine serum albumin). The Antibody-APC conjugate solution could be stored at 4 °C for two months without significant change when stored in the presence of 2 mM sodium azide and kept from light. For longer storage, the antibody-APC conjugates could be lyophilized and stored at ≤ –20 °C.
Table 1.Available fluorophores at AAT Bioquest Buccutite™ Rapid Antibody Labelling Kits

Cat#	Labels	Ex (nm)	Em (nm)
1310	PE	565	575
1322	PE-Cy5	565	674
1316	PE-Cy5.5	565	700
1317	PE-Cy7	565	780
1318	PE-Texas Red	565	600
1311	APC	651	662
1319	APC-iFluor™ 700	651	713
1320	APC-Cy5.5	651	700
1321	APC-Cy7	651	780
1325	PerCP	482	677

Spectrum

Open in Advanced Spectrum Viewer

Product family

Name	Excitation (nm)	Emission (nm)	Extinction coefficient (cm ^-1 M ^-1)	Quantum yield	Correction Factor (280 nm)
Buccutite™ Rapid PE Antibody Labeling Kit Microscale Optimized for Labeling 100 ug Antibody Per Reaction	565	574	1960000	0.82	0.175
Buccutite™ Rapid PE Antibody Labeling Kit Microscale Optimized for Labeling 25 ug Antibody Per Reaction	565	574	1960000	0.82	0.175
Buccutite™ Rapid PerCP Antibody Labeling Kit Microscale Optimized for Labeling 100 ug Antibody Per Reaction	477	678	406000	-	0.22
Buccutite™ Rapid PerCP Antibody Labeling Kit Microscale Optimized for Labeling 25 ug Antibody Per Reaction	477	678	406000	-	0.22
Buccutite™ Rapid PE Antibody Labeling Kit Production Scale Optimized for Labeling 1 mg Antibody Per Reaction	565	574	1960000	0.82	0.175
Buccutite™ Rapid PerCP Antibody Labeling Kit Production Scale Optimized for Labeling 1 mg Antibody Per Reaction	477	678	406000	-	0.22

References

View all 46 references: Citation Explorer

Chromophore attachment to phycobiliprotein beta-subunits: phycocyanobilin:cysteine-beta84 phycobiliprotein lyase activity of CpeS-like protein from Anabaena Sp. PCC7120
Authors: Zhao KH, Su P, Li J, Tu JM, Zhou M, Bubenzer C, Scheer H.
Journal: J Biol Chem (2006): 8573

Excitation energy transfer from phycobiliprotein to chlorophyll d in intact cells of Acaryochloris marina studied by time- and wavelength-resolved fluorescence spectroscopy
Authors: Petrasek Z, Schmitt FJ, Theiss C, Huyer J, Chen M, Larkum A, Eichler HJ, Kemnitz K, Eckert HJ.
Journal: Photochem Photobiol Sci (2005): 1016

Single-molecule spectroscopy selectively probes donor and acceptor chromophores in the phycobiliprotein allophycocyanin
Authors: Loos D, Cotlet M, De Schryver F, Habuchi S, Hofkens J.
Journal: Biophys J (2004): 2598

Isolation and characterisation of phycobiliprotein rich mutant of cyanobacterium Synechocystis sp
Authors: Prasanna R, Dhar DW, Dominic TK, Tiwari ON, Singh PK.
Journal: Acta Biol Hung (2003): 113

Evaluation of Tolypothrix germplasm for phycobiliprotein content
Authors: Prasanna R, Prasanna BM, Mohammadi SA, Singh PK.
Journal: Folia Microbiol (Praha) (2003): 59

Page updated on November 16, 2024

Ordering information

Price
Unit size
Catalog Number	1311
Quantity

Add to cart

Additional ordering information

Telephone	1-800-990-8053
Fax	1-800-609-2943
Email	sales@aatbio.com
International	See distributors
Bulk request	Inquire
Custom size	Inquire
Technical Support	Contact us
Purchase order	Send to sales@aatbio.com
Shipping	Standard overnight for United States, inquire for international